Table of Contents
- Check the vacuum cleaner so that you can find out what is wrong
- Confirm that the vacuum cleaner has been tuned on and plugged in
- Look out for an over-temperature feature
- Make sure that you do everything required in maintaining a vacuum cleaner
- Check the brush roll to confirm that its spinning whenever necessary
- Follow electrical paths if you notice that the vacuum isn’t turning on
- Look for the reasons that may cause the fuses that you replace to go out
- Inspect the motor in order to have a proper operation
- Inspect the brushes
- Replace bearings or apply new lubrication
- Inspect the blower to check whether there are bents or broken fins
- Replace all broken wheels
- Repair all leaks
A good vacuum cleaner is functional is vital for homeowners to get the desired results. Vacuum cleaners must be properly maintained so that they can offer perfect services and last long. Vacuum cleaners that have enough power suctions are very important since abrasion by vacuum cleaners on carpets can cause wear and tear.
Vacuum cleaners are very simple machines and fixing them has never been a difficult task. There are 13 steps that are very important to homeowners whenever they want to fix a vacuum cleaner. Below are the 13 steps on How to fix a vacuum cleaner.
Check the vacuum cleaner so that you can find out what is wrong
Check out whether its turning on, check whether its staying on. Check whether its vacuuming unevenly or weakly. Check whether it’s leaving fuzz behind. Does it trip the circuit breaker?. Does it produce noise or odor whenever it’s running?
Confirm that the vacuum cleaner has been tuned on and plugged in
Check the electric outlet to ensure that power is flowing in. If you do not have circuit testers, plug in a radio or a plug that functions.
Look out for an over-temperature feature
There are certain vacuum cleaners that have devices that stop machines whenever they overheat. Whenever your vacuum cleaner cuts out make sure that you unplug it. Check the manual as you wait for a few minutes. After a few minutes, look out for problems and obstructions as you turn it on.
Make sure that you do everything required in maintaining a vacuum cleaner
If the machine functions weakly, do a thorough check up on the vacuum cleaner. If it is functioning to satisfactory levels, don’t go past this level.
Check the brush roll to confirm that its spinning whenever necessary
Turn on your vacuum cleaner and take your time when looking underneath. You must never touch a brush roll that is spinning.
Follow electrical paths if you notice that the vacuum isn’t turning on
Use multimeters when checking continuity and look out for open circuits. Ensure that you clean the contacts as you replace the segments on the electrical path that do not have continuity. Make sure that you are using the correct fuses.
Look for the reasons that may cause the fuses that you replace to go out
Look out whether this happens due to short circuits or whether it’s the motor that’s going out. Correct all the problems that you find.
Inspect the motor in order to have a proper operation
Its never economical but you are capable of servicing some parts of the motor.
Inspect the brushes
If they look worn out, replace them.
Replace bearings or apply new lubrication
There are bearings for motors and blowers. There are also bearings for shafts as well as for powered drive wheels. Look for every place that is spinning.
Inspect the blower to check whether there are bents or broken fins
Replace them whenever you find any. The blower is usually attached at the opposite side of the motor. Any type of unevenness may lead to an imbalance and this can lead to damages on the bearing or motor.
Replace all broken wheels
It’s very simple to replace a broken wheel, but again broken wheels have the potential to slow you down. Remove the caps or covers so that you can access the attachment points of the wheels.
Repair all leaks
If you find out that there is something that has punctured the hose, ensure that you remove it using a plier as you cover the opening using an electric tape. You can also use a silicone sealant when covering the opening.
Those are our 13 simple steps and we hope that you will fix your vacuum cleaner easily and correctly!